Crash-responsive emergency lighting, Replacing bulbs, Important safety notes – Mercedes-Benz 2013 M Class User Manual
Page 130: Lights and windshield wipers
X
To switch on: set the switch to center
position B.
X
To switch off: set the switch to the |
position.
The interior lighting automatically switches
on if you:
R
unlock the vehicle
R
open a door
R
remove the SmartKey from the ignition
lock.
The interior light is activated for a short while
when the SmartKey is removed from the
ignition lock. You can activate this delayed
switch-off using the on-board computer
(
Manual interior lighting control
Overhead control panel
:
p To switch the left-hand front reading
lamp on/off
;
c To switch the front interior lighting
on
=
v To switch the rear interior lighting
on/off
?
| To switch the front interior lighting/
automatic interior lighting control off
A
p To switch the right-hand front
reading lamp on/off
B
To switch the automatic interior lighting
control on
X
To switch the front interior lighting on:
set the switch to the c position.
X
To switch the interior lighting off: set the
switch to the | position or (if the door
is closed) to the center position.
X
To switch the rear interior lighting on/
off: press the u button.
X
To switch the reading lamps on/off:
press the p button.
Crash-responsive emergency lighting
The interior lighting is activated automatically
if the vehicle is involved in an accident.
X
To switch off the crash-responsive
emergency lighting: press the hazard
warning lamp button.
or
X
Lock and then unlock the vehicle using the
SmartKey.
Replacing bulbs
Important safety notes
Xenon bulbs
G
DANGER
Xenon bulbs carry a high voltage. You can get
an electric shock if you remove the cover of
the Xenon bulb and touch the electrical
contacts. There is a risk of fatal injury.
Never touch the parts or the electrical
contacts of the Xenon bulb. Always have work
on the Xenon bulbs carried out at a qualified
specialist workshop.
If your vehicle is equipped with Xenon bulbs,
you can recognize this by the following: the
cone of light from the Xenon bulbs moves
from the top to the bottom and back again
when you start the engine. For this to be
observed, the lights must be switched on
before starting the engine.
128
Replacing bulbs
Lights and windshield wipers