Engine number, Service products and filling capacities, Important safety notes – Mercedes-Benz 2013 M Class User Manual

Page 446: Service products and filling capaci, Ties, Number, Technical data

Advertising
background image

VIN

X

Open the front right-hand door.

X

Open cover : in the direction of the arrow
and remove it.
You will see the VIN.

The VIN can also be found in the following
locations:

R

on the lower edge of the windshield
(

Y

page 444)

R

on the vehicle identification plate
(

Y

page 443)

Engine number

:

Emission control information plate,
including the certification of both federal
and Californian emissions standards

;

Engine number (stamped into the
crankcase)

=

VIN (on the lower edge of the windshield)

Service products and filling

capacities

Important safety notes

G

WARNING

Service products may be poisonous and
hazardous to health. There is a risk of injury.
Comply with instructions on the use, storage
and disposal of service products on the labels
of the respective original containers. Always
store service products sealed in their original
containers. Always keep service products out
of the reach of children.

H

Environmental note

Dispose of service products in an
environmentally responsible manner.

Service products include the following:

R

fuels (e.g. gasoline, diesel)

R

exhaust gas aftertreatment additives, e.g.
DEF

R

lubricants (e.g. engine oil, transmission oil)

R

coolant

R

brake fluid

R

windshield washer fluid

R

climate control system refrigerant

Comply with all valid regulations with respect
to handling, storing, and disposing of service
fluids.
Components and service products must be
matched. You should therefore only use
products that have been tested and approved
by Mercedes-Benz.
Information on tested and approved products
can be obtained at an authorized Mercedes-
Benz Center or on the Internet at
http://bevo.mercedes-benz.com.
You can recognize service products approved
by Mercedes-Benz by the following
inscription on the containers:

R

MB-Freigabe (e.g. MB-Freigabe 229.51)

R

MB Approval (e.g. MB Approval 229.51)

444

Service products and filling capacities

Technical data

Advertising