Safety, Occupant safety – Mercedes-Benz 2013 M Class User Manual

Page 59

Advertising
background image

X

Adjust the seat and move the backrest to
an almost vertical position (

Y

page 102).

X

Pull the seat belt smoothly through belt
sash guide :.

X

Without twisting it, guide the shoulder
section of the seat belt across the middle
of your shoulder and the lap section across
your pelvis.

X

Engage belt tongue ; in buckle =.
Seat-belt adjustment: if necessary, the
driver's and front-passenger seat belts
automatically adjust to the upper body
(

Y

page 57).

X

If necessary, adjust the seat belt to the
appropriate height (

Y

page 57).

X

If necessary, pull upwards on the shoulder
section of the seat belt to tighten the belt
across your body.

All seat belts except the driver's seat belt are
equipped with a special seat belt retractor to
securely fasten child restraint systems in the
vehicle. Further information can be found
under "Special seat belt retractor"
(

Y

page 62).

For more information about releasing the seat
belt with release button ?, see "Releasing
seat belts" (

Y

page 58).

Seat belt adjustment

The seat-belt adjustment function adjusts the
driver's and front-passenger seat belt to the
upper body of the occupants.
The belt strap is tightened slightly when:

R

you engage the belt tongue in the belt
buckle and you then turn the SmartKey to
position

2 in the ignition lock.

R

the SmartKey is in position

2 in the ignition

lock and you then engage the belt tongue
in the buckle.

The seat-belt adjustment will apply a
retraction force if any slack is detected
between the occupant and the seat belt. Do
not hold on to the seat belt tightly while it is
adjusting. You can switch the seat-belt
adjustment on and off in the on-board
computer (

Y

page 277).

The seat-belt adjustment is an integral part of
the PRE-SAFE

®

convenience function. More

information about PRE-SAFE

®

can be found

under "PRE-SAFE

®

(preventative occupant

protection)" (

Y

page 54).

Belt height adjustment

You can adjust the seat belt height on the
front seats. Adjust the belt to a height that
allows the upper part of the seat belt to be
routed across the center of your shoulder.

X

To raise: slide the belt sash guide upwards.

The belt sash guide engages in various
positions.

X

To lower: press and hold belt sash guide

release :.

Occupant safety

57

Safety

Z

Advertising