Resetting the side windows, Opening and closing, Side windows – Mercedes-Benz 2013 M Class User Manual

Page 96

Advertising
background image

Vehicles with KEYLESS-GO:

R

Release the sensor surfaces on the exterior
door handle to interrupt the closing
procedure.

R

To open, pull the same door handle
immediately and hold it firmly. The door
windows and the sliding sunroof will open
for as long as the door handle is held but
the door is not opened.

i

Notes on the automatic reversing feature

for:

R

the side window (

Y

page 92)

R

the sliding sunroof (

Y

page 96)

Using the SmartKey

The SmartKey must be close to the driver's
door handle.

X

Point the tip of the SmartKey at the driver's
door handle.

X

Press and hold the & button until the
side windows and the sliding sunroof or the
panorama roof with power tilt/sliding
panel are fully closed.

X

Make sure that all the side windows and the
sliding sunroof or panorama roof with
power tilt/sliding panel are closed.

On vehicles with a panorama roof with power
tilt/sliding panel:

X

Press and hold the & button again until
the roller sunblinds of the panorama roof
with power tilt/sliding panel close.

X

To interrupt convenience closing:

release the & button.

Using KEYLESS-GO

The KEYLESS-GO key must be outside the
vehicle. All the doors must be closed.

X

Touch recessed sensor surface : on the
door handle until the side windows and the
sliding sunroof or the panorama roof with
power tilt/sliding panel are fully closed.

i

Make sure you only touch recessed

sensor surface :.

X

Make sure that all the side windows and the
sliding sunroof or panorama roof with
power tilt/sliding panel are closed.

On vehicles with a panorama roof with power
tilt/sliding panel:

X

Touch recessed sensor surface : on the
door handle again until the roller sunblinds
of the panorama roof with power tilt/
sliding panel close.

X

To interrupt convenience closing:

release recessed sensor surface : on the
door handle.

Resetting the side windows

If a side window can no longer be closed fully,
you must reset it.

X

Close all the doors.

X

Turn the SmartKey to position

1 or 2 in the

ignition lock.

X

Pull the corresponding switch on the door
control panel until the side window is
completely closed. (

Y

page 92)

X

Hold the switch for an additional second.

94

Side windows

Opening and closing

Advertising