Safety, Driving safety systems – Mercedes-Benz 2013 M Class User Manual

Page 76

Advertising
background image

The braking action of PRE-SAFE

®

Brake is

ended automatically if:

R

you maneuver to avoid the obstacle.

R

there is no longer any danger of a rear-end
collision.

R

there is no longer an obstacle detected in
front of your vehicle.

If you have activated DSR (

Y

page 246), PRE-

SAFE

®

Brake is deactivated.

At speeds of up to approximately 40 mph
(70 km/h), PRE-SAFE

®

Brake can also detect

stationary objects. Examples of stationary
objects are stopped or parked vehicles.
If you approach an obstacle and PRE-SAFE

®

Brake detects a risk of a collision, the system
will alert you both visually and acoustically. If
you do not brake or take evasive action, the
system will warn you by automatically braking
the vehicle gently. If there is an increased risk
of collision, preventative passenger
protection measures (PRE-SAFE

®

) are

activated (

Y

page 54). If, at speeds over

20 mph (30 km/h), a risk of collision remains
and you do not brake, take evasive action or
significantly accelerate, automatic braking
may be performed up to a level of automatic
emergency braking. Automatic emergency
braking is not performed until immediately
prior to an accident that can no longer be
avoided.

G

WARNING

PRE-SAFE

®

Brake will initially brake your

vehicle by a partial application of the brakes
if a danger of collision is detected. There may
be a collision unless you also brake.
Automatic emergency braking cannot prevent
a collision. There is a risk of an accident.
Always apply the brakes yourself and try to
take evasive action.

G

WARNING

PRE-SAFE

®

Brake cannot always clearly

identify objects and complex traffic
conditions.

In these cases, PRE-SAFE

®

Brake may:

R

give an unnecessary warning and then
brake the vehicle

R

not give a warning or intervene

There is a risk of an accident.
Always pay particular attention to the traffic
situation and be ready to brake, especially if
PRE-SAFE

®

Brake warns you. Terminate the

intervention in a non-critical driving situation.

In particular, the detection of obstacles can
be impaired if:

R

there is dirt on the sensors or anything else
covering the sensors

R

snow or heavy rain

R

interference by other radar sources

R

there are strong radar reflections, for
example in parking garages

R

a narrow vehicle traveling in front, e.g. a
motorbike

R

a vehicle traveling in front on a different line
relative to the center of your vehicle

G

WARNING

PRE-SAFE

®

Brake does not react:

R

to people or animals

R

to oncoming vehicles

R

to crossing traffic

R

when cornering

As a result, PRE-SAFE

®

Brake may neither

give warnings nor intervene in all critical
situations. There is a risk of an accident.
Always pay careful attention to the traffic
situation and be ready to brake.

In order to maintain an appropriate distance
from the vehicle in front and thus prevent a
collision, you must apply the brakes yourself.

X

To activate/deactivate: activate or
deactivate PRE-SAFE

®

Brake in the on-

board computer (

Y

page 272).

When PRE-SAFE

®

Brake is activated, the

Ä symbol appears in the multifunction
display as long as the HOLD function is

74

Driving safety systems

Safety

Advertising