Mercedes-Benz 2013 M Class - Manual (Page 273)

X Switch on the mobile phone (see the
separate operating instructions).
X Switch on COMAND (see the separate
operating instructions).
X Establish a Bluetooth ® connection to
COMAND; see the separate operating
instructions.
X Press the = or ; button on the
steering wheel to select the
Tel menu.
You will see one of the following display
messages in the multifunction display:
R
Phone READY or the name of the network
provider: the mobile phone has found a
network and is ready to receive.
R
Telephone No Service : there is no
network available or the mobile phone is
searching for a network.
Accepting a call
Example: incoming call
If someone calls you when you are in the
Tel menu, a display message appears in the
multifunction display.
X Press the 6 button on the steering
wheel to accept an incoming call.
You can accept a call even if you are not in
the
Tel menu.
Rejecting or ending a call
X Press the ~ button on the steering
wheel.
You can end or reject a call even if you are not
in the
Tel menu.
Dialing a number from the phone book
X Press the = or ; button on the
steering wheel to select the
Tel menu.
X Press the 9, : or a button to
switch to the phone book.
X Press the 9 or : button to select the
desired name.
or
X To begin rapid scrolling: press and hold
the 9 or : button for longer than
one second.
Rapid scrolling stops when you release the
button or reach the end of the list.
X If only one telephone number is stored
for a name: press the 6 or a button
to start dialing.
or
X If there is more than one number for a
particular name: press the 6 or a
button to display the numbers.
X Press the 9 or : button to select the
number you want to dial.
X Press the 6 or a button to start
dialing.
or
X To exit the telephone book: press the
~ or % button.
Redialing
The on-board computer saves the last names
or numbers dialed in the redial memory.
X Press the = or ; button on the
steering wheel to select the
Tel menu.
X Press the 6 button to switch to the
redial memory.
X Press the 9 or : button to select the
desired name or number.
X Press the 6 or a button to start
dialing.
or
X To exit the redial memory: press the
~ or % button.
Menus and submenus
271
On-board computer and displays
Z