Active driving assistance package, Driving and parking, Driving systems – Mercedes-Benz 2013 M Class User Manual

Page 239

Advertising
background image

symbol : is shown in green. Lane Keeping
Assist is ready for use.

Standard
If

Standard

is selected, no warning vibration

occurs if:

R

you switch on the turn signals. In this event,
the warnings are suppressed for a certain
period of time.

R

a driving safety system intervenes, such as
ABS, BAS or ESP

®

.

Adaptive
If

Adaptive

is selected, no warning vibration

occurs if:

R

you switch on the turn signals. In this event,
the warnings are suppressed for a certain
period of time.

R

a driving safety system intervenes, e.g.
ABS, BAS or ESP

®

.

R

you accelerate hard, e.g. kickdown.

R

you brake hard.

R

you steer actively, e.g. swerve to avoid an
obstacle or change lanes quickly.

R

you cut the corner on a sharp bend.

In order that you are warned only when
necessary and in good time if you cross the
lane marking, the system recognizes certain
conditions and warns you accordingly.
The warning vibration occurs earlier if:

R

you approach the outer lane marking on a
bend.

R

the road has very wide lanes, e.g. a
highway.

R

the system recognizes solid lane markings.

The warning vibration occurs later if:

R

the road has narrow lanes.

R

you cut the corner on a bend.

Active Driving Assistance package

General notes

The Active Driving Assistance package
consists of DISTRONIC PLUS (

Y

page 194),

Active Blind Spot Assist (

Y

page 237) and

Active Lane Keeping Assist (

Y

page 241).

Active Blind Spot Assist

General notes
Active Blind Spot Assist uses a radar sensor
system to monitor the side areas of your
vehicle which are behind the driver. A warning
display in the exterior mirrors draws your
attention to vehicles detected in the
monitored area. If you then switch on the
corresponding turn signal to change lane, you
will also receive an optical and audible
warning. If a risk of lateral collision is
detected, corrective braking may help you
avoid a collision. To support the course-
correcting brake application, Active Blind
Spot Assist uses the forward-facing radar
sensor system. The free space in the direction
of travel is then evaluated.
Active Blind Spot Assist supports you from a
speed of approximately 20 mph (30 km/h).
For Active Blind Spot Assist to assist you
when driving, the radar sensor system must
be:

R

activated (

Y

page 277)

R

operational

Important safety notes
Active Blind Spot Assist is only an aid. It may
fail to detect some vehicles and is no
substitute for attentive driving.

G

WARNING

Active Blind Spot Assist does not react to:

R

vehicles overtaken too closely on the side,
placing them in the blind spot area

R

vehicles approaching and driving by with a
speed difference of more than
approximately 6.8 mph (11 km/h)

Driving systems

237

Driving and parking

Z

Advertising