Seat belts, Safety, Occupant safety – Mercedes-Benz 2013 M Class User Manual

Page 60

Advertising
background image

X

Slide the belt sash guide downwards.

X

Release belt sash guide release : and
make sure that the belt sash guide has
engaged.

Releasing seat belts
!

Make sure that the seat belt is fully rolled

up. Otherwise, the seat belt or belt tongue
will be trapped in the door or in the seat
mechanism. This could damage the door,
the door trim panel and the seat belt.
Damaged seat belts can no longer fulfill
their protective function and must be
replaced. Visit a qualified specialist
workshop.

:

Belt sash guide

;

Seat belt tongue

=

Buckle

?

Release button

X

Press release button ? and guide belt
tongue ; back towards belt sash
guide : .

Belt warning for the driver and front

passenger

Regardless of whether the driver's and front-
passenger seat belts have already been
fastened, the 7 seat belt warning lamp

lights up for six seconds each time the engine
is started. It then goes out if the driver and
the front passenger have fastened their seat
belts.
If the driver's seat belt is not fastened when
the engine is started, an additional warning
tone will sound. The warning tone goes out
after approximately six seconds or once the
driver's seat belt is fastened.
If after six seconds the driver or front
passenger have not fastened their seat belts
and the doors are closed, the 7 seat belt
warning lamp lights up:

R

until the driver's or front passenger's seat
belt is fastened

R

if a vehicle speed of 15 mph (25 km/h) is
exceeded, a warning tone also sounds with
increasing intensity for a maximum of
60 seconds or until the driver or front
passenger have fastened their seat belts.

If the driver/front passenger unfasten their
seat belt while the vehicle is in motion, the
7 seat belt warning lamp lights up and a
warning tone sounds again.
The warning tone ceases even if the driver or
front passenger have still not fastened their
seat belt after 60 seconds. The 7 seat belt
warning lamp stops flashing but remains
illuminated.
After the vehicle comes to a standstill, the
warning tone is reactivated and the 7 seat
belt warning lamp flashes again if the vehicle
speed again exceeds 15 mph (25 km/h).
The 7 seat belt warning lamp only goes
out if:

R

both the driver and the front passenger
have fastened their seat belts.
or

R

the vehicle is stationary and a door is open.

i

For more information on the 7 seat

belt warning lamp, see "Warning and
indicator lamps in the instrument cluster,
seat belts" (

Y

page 317).

58

Occupant safety

Safety

Advertising