Atlona AT UHD CLSO 824 - Manual (Page 10)

10
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
EDID Setting EDID Mode Select input port: # 1 to 7 1. Default
2. Memory Select memory number: #
3. Int Source # Mode: Int Default
ATL 2160P60 Multi CH
ATL 2160P60 2CH
ATL 2160P30 Multi CH
ATL 2160P30 2CH
ATL 1920x1200 RGB 2CH
ATL 1080P DD
ATL 1080P Multi CH
ATL 1080P 2CH
ATL 1080P 3D DD
ATL 1080P 3D Multi CH
ATL 1080P 3D 2CH
ATL 1080P DVI
ATL 1280x800 RGB 2CH
ATL 1280x800 RGB DVI
ATL 1366x768 RGB 2CH
ATL 1024x768 RGB 2CH
ATL 720P DD
ATL 720P 2CH
800x600 RGB 2CH
EDID copy Select output number: # 1 to 4 Save to Memory: # 1 to 8
Prefer Timing Select input port: # 8 Default
1920x1200
1920x1080
1280x800
1366x768
1024x768
1280x720
800x600
IR Settings IR Receiver 1. On
2. Off
Reset --------
Info MCU FW ver: VX.XX.XX
Valens FW ver: VX.X
FPGA FW ver: VX.X
DSP FW ver: VX.X
IP
X.X.X.X
NetMask
X.X.X.X
Gateway
X.X.X.X
TCP/IP port
XX
Console
XXXXX, X, X, X
EDID settings can be set for the HDMI and HDBaseT ports.
Prefer Timing can be set to the VGA port only.