Atlona AT UHD CLSO 824 - Manual (Page 6)

6
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Analog Multi-Function Inputs
The CLSO-824 multi-function analog inputs (Input 8) can be used with analog video signal formats
including VGA (with DDC) , RGBHV (without DDC) , and component (YUV) . Balanced analog audio can be
input and embedded using the provided captive screw connectors.
Either format can be directly accessed from RS-232, IR, or IP control. It can also be accessed through
the front panel menu.
VGA (m) to BNC and VGA (m) to RCA adaptors can be used to connect sources to this inputs.
VGA
Use a VGA to VGA cable to ensure that the Preferred Resolution DDC is communicated to your
source.
RGBHV
Use a HD-15
(VGA) to 5 BNC breakout cable for this format. An existing RGBHV analog matrix
switch can be connected here to maintain full function of the analog matrix.
Component
YUV (YP
b
P
r
) signal from DVD (or other sources) can be input to the CLSO-824 using the green (Y),
blue (P
b
), and red (P
r
) connections on a HD-15 (VGA) to 5 BNC breakout cable or with a
VGA - 3 RCA adaptor.
A common application for this type of input would be to connect a RGBHV matrix switcher to the
CLSO-824.