Atlona AT UHD CLSO 824 - Manual (Page 16)

16
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
The EDID page provides the option to adjust the EDID of the HDMI and HDBaseT ports, select the
preferred timing of the VGA port, and set the HDCP compliance reporting.
Note: If no audio is being received, try adjusting EDID. If the CLSO does not receive a complete EDID and the HDMI
port will default to DVI (which has no audio).
Note: 2Ch audio EDID is recomended unless the system is being used as an audio pass through.
Note: CLSO-824 protects HDCP encoded content and will not pass HDCP content to a non-HDCP compliant device.
Note: Some devices flag all content as protected when connected to an HDCP compliant display. This prevents what
should be non-protected content from reaching non-compliant devices (e.g. teleconference system) through
the CLSO-824.
Note: When HDCP reporting is non-compliant, only user created content is transmitted. Protected content from all
sources (ex. Blu-ray, AppleTV, etc.) is blocked.
Note: These functions are also controllable using TCP/IP or RS-232 commands.