Atlona AT UHD CLSO 824 - Manual (Page 9)

9
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Front Panel Control
Route Setting Route Default
Route All Select route source: # 1 to 8
Recall memory Select memory route: # 1 to 8
Save memory Select memory route: # 1 to 8
VGA mode Select mode: comp
vga
Audio Setting Audio Route Select output number: # 1 or 2 Audio Route Out #
(Program Audio Source)
AFV
AFOV
AUX 1
AUX 2
Audio preset Save to preset: # 1 to 4
Aux Mixer Select output number: # 1 or 2 ON
OFF
Input volume Input volume HDBT1
HDBT2
HDBT3
HDMI4
HDMI5
HDMI6
HDMI7
VGA8
Ducking Select output number: # 1 or 2 ON
OFF
Audio delay Select output number: # 1 or 2 0 to 150 ms
EQ Select output number: # 1 or 2 <120Hz -12 to 15 dB
500Hz -12 to 15 dB
1.2kHz -12 to 15 dB
3kHz -12 to 15 dB
7.5kHz -12 to 15 dB
Audio Mono Select output number: # 1 or 2 ON
OFF
Although the Web GUI is recommend for complete setup, many functions can also be completed
using the front panel buttons and display. See page 11 for GUI operation. Use the menu button
to access the menu. Once in the menu, use the enter button to select options, the up/down arrows
to navigate, number buttons for selecting the inputs and outputs, and the menu button for going
back one level of the menu.
Audio ducking, delay and EQ adjust audio settings of HDMI, HDBaseT, and analog audio outputs.
Audio mono adjusts analog audio outputs only. These settings and adjustments to not change
pass-through multichannel PCM, Dolby and DTS signals.