BINDER BD 23 - Manual (Page 42)

BD / ED / FD (E2) 02/2015 page 42/63
10. Disposal
10.1 Disposal of the transport packing
Packing element Material Disposal
Straps to fix packing on pallet Plastic Plastic recycling
Wooden transport box (option)
with metal screws
Non-wood (compressed
matchwood, IPPC standard)
Wood recycling
Metal Metal recycling
Pallet (from size 115 on)
with foamed plastic stuffing (from
size 240 on)
Solid wood (IPPC standard) Wood recycling
Transport box
with metal clamps
Cardboard Paper recycling
Metal Metal recycling
Top cover (size 720 only) Cardboard Paper recycling
Removal
aid (sizes 240
and 400 only)
Cardboard Paper recycling
Plastic Plastic recycling
Edge protection Styropor ® or PE foam Plastic recycling
Protection of doors and racks PE foam Plastic recycling
Bag for operating manual PE foil Plastic recycling
Insulating air cushion foil (packing of
optional accessories)
PE foil Plastic recycling
If recycling is not possible, all packing parts can also be disposed of with normal waste.
10.2 Decommissioning
Turn off ED units sizes 400 and 720 at the main power switch (10). Disconnect the unit from the power
supply.
When turning off the main power switch (10), the stored parameters remain saved.
• Temporal decommissioning: See indications for appropriate storage, chap. 3.3.
• Final decommissioning: Dispose of the unit as described in chap. 10.3 to 10.5.
10.3 Disposal of the unit in the Federal Republic of Germany
According to directive 2002/96/EC of the European Parliament and of the Council on waste electrical and
electronic equipment (WEEE), BINDER devices are classified as “monitoring and control instruments”
(category 9) only intended for professional use“. They must not be disposed of at public collecting points.
The incubators BD and drying and heating ovens ED and FD bear the symbol for the
marking of electrical and electronic equipment manufactured / placed on the market in the
EC after 13 August 2005 and be disposed of in separate collection according to the
directive 2002/96/EC on waste electrical and electronic equipment (WEEE) and German
national law for electrical and electronic equipment (Elektro- und Elektronikgerätegesetz,
ElektroG). WEEE marking: crossed-out wheeled bin with solid bar under. A significant part
of the materials must be recycled in order to protect the environment.
At the end of the device’s service life, have the device disposed of according to the German national law
for electrical and electronic equipment (Elektro- und Elektronikgerätegesetz, ElektroG) from 23 March
2005, BGBl. I p. 762 or contact BINDER Service who will organize taking back and disposal of the unit
according to the German national law for electrical and electronic equipment (Elektro- und
Elektronikgerätegesetz, ElektroG) from 23 March 2005, BGBl. I p. 762.