CIRCUTOR AR5L Series - Manual (Page 39)

39
6.1.3.- COMM: Communication parameters
Program here the parameters of the built-in RS-232 serial output. When
selecting this option the present parameters are shown on display:
COMM
9600 NO 8 1
Baud / Parity / Length / Stop bits
- Pressing [ENTER]: values on display are directly validated.
- To modify: (rotary input).
- Select with keys [ 4 4 4 4] or [3 3 3 3] the position to modify.
- Though keys [ 6 6 6 6], [5 5 5 5] the value of the selected position is increased or
decreased.
- [ENTER] to validate the total value or [ESC] to exit with no modification.
6.1.4.- CLOCK: Internal clock
Use this section to set the analyzer internal clock in time: date / time and
displaying format.
When this option is selected, presently programmed values are shown by
display:
CLOCK TYPE
DD /MM/YY HH :MM:SS
CLOCK TYPE
MM/DD/YY HH :MM:SS
After validating the date format, the present date and time will be displayed
according to the selected arrangement:
CLOCK
00 /00 /00 00 :00 : 00
Proceed similarly than for the former section.