CIRCUTOR AR5L Series - Manual (Page 41)

41
6.1.6.- RECALL: Read configuration
You can here recall a standard configuration.
Set Standard..
sure?
<yes > <no>
- A confirmation is requested: “Recall Setup sure <yes> or <no>“. With keys
[ 4 4 4 4] & [3 3 3 3] select yes or no, and then press [ENTER].
A “Standard” operation program for the analyzer is available to be user-recalled.
Its features are:
- V.T. ratio (SET + V) : 1 / 1
- Current ratio : 1000 A
- Neutral current ratio : 100 A
- Measuring circuit : 3
Φ
4 Wires .
- Period (SET + PERIOD) : 15 minutes
- TRIGGERS (Time and parameter) : All set to zero
- File name (FILE Name) : STD-PROG -- Linear
- Communication parameters : 9600, No, 8, 1
- RUN : RUN
- Password : [ 3] [SET] [5] [SET]
- Password for turning the analyzer off : NO