CIRCUTOR AR5L Series - Manual (Page 5)

5
d) Current measuring range: according to the Current clamp used
Current clamps Measuring range
CP-2000-200
10 to 2000 A a.c. (switch at 2000)
1 to 200 A a.c. (switch at 200)
CPR-1000 5 to 1000 A a.c.
CPR-500 2,5 to 500 A a.c.
CP-100 (M1-U) 0, 5 to 100 A a.c.
CP-5
25 mA to 5 A a.c.
Flexible clamp Measuring range
C-FLEX 200-2000-20000 100 to 20000 A a.c (scale 20000
A)
10 to 2000 A a.c. (scale 2000 A)
1 to 200 A a.c. (scale 200 A)
NOTE: It is advisable to measure near of full-scale value to get better accuracy.
1.4.- Operation instructions
The analyzer is a programmable instrument so offering diverse operation
modes, which can be selected from the available programming menus (6.-
PROGRAMMING THE ANALYZER).
Please read carefully the paragraphs involving (4.- Installation AND START-
UP 6.- PROGRAMMING THE ANALYZER) in order to select the most suitable
operation mode for your requirements.
If the instrument is not used according to
manufacturer’s specifications, the protection of
the instrument can be damaged.