CIRCUTOR DHB Series - Manual (Page 12)

12
5. SERVICE
5.1. Display Description
Fig. 7. Description of the Meter Frontal Plate
5.2. Messages after Switching the Supply on
After switching the supply on, the meter displays the meter name DHB
-1xx and next, the program version in the shape „ x.xx” – where x.xx is
the number of the current program version or the number of a custom
-made option. Next, the meter carries out measurements and displays
the value of the input signal. The meter sets up automatically the de-
cimal point position when displaying the value. The format (number of
places after the decimal point) can be limited by the user.
5.3. Functions of Buttons
- Acceptation button:
Þ entry in programming mode (press and hold down ca 3 seconds),
has not gone by