CIRCUTOR DHB Series - Manual (Page 22)

22
Table 3
Ind
Parameter
symbol
Description Range of changes
IndCp
Number of points of the individual
characteristic. For a value lower than 2,
the individual characteristic is switched
off. The number of segments is the
number of points reduced of one.
In CountH and HoUr modes, the indi-
vidual characteristic is not taken into
consideration.
1...21
Xn
Point value for which we will expect Yn
(n-point number)
-19999...99999
Yn Expected value for Xn. -19999...99999
E_In2
Permit for external functions:
start/stop, erasing
On – Control inputs steers the
work of the auxiliary counter.
Off – Control inputs do not
influence the auxiliary counter
work.
Auto2
The counter is automatically erased
after reaching this value. The write of
the value 0 switches the function off.
-19999...99999
CLr2
Erase the counter contents. The
choice of the option Y causes the
rewrite of the value Auto2 to the
counter and the transition of the
function in the state n.
nO – Do not erase,
YeS – Erase the counter,
AUtO2 – rewrite value of
AUtO2 to aux counter