CIRCUTOR DHB Series - Manual (Page 6)

6
2. METER SET
The set is composed of:
- DHB-1xx meter .................................... 1 pc
- User’s manual ..................................... 1 pc
- Guarantee card ................................... 1 pc
- Set of clamps to fix in the panel .......... 4 pcs
- Seal ..................................................... 1 pc
When unpacking the meter, please check whether the type and option
code on the data plate correspond to the order.
l
interface with MODBUS protocol in the RTU mode (DHB-124),
l
firmware updating by RS485 interface (DHB-124)
l
conversion of the measured value into a standard – programmable
current or voltage signal (DHB-124),
l
highlight of any measuring unit acc. to the order.
l
signaling of alarm operation – switching the alarm on causes the
highlight of the output number,
l
galvanic separation of pulse inputs between them,
l
galvanic separation between terminals: alarm, supply, input,
analog output, auxiliary supply, RS-485 interface.
Protection grade from frontal side: IP65
Meter overall dimensions: 96 x 48 x 93 mm (with terminals).
The meter casing is made of plastic.
Fig. 1 View of the DHB-1xx Digital Meter