CIRCUTOR DHB Series - Manual (Page 10)

10
4.2. Examples of Connections
An example of a DHB-1xx meter and a inductive sensor connection
with an output of NPN and PNP type is presented on the fig. 5. The
way to connect a transducer with an output of contactron/relay type is
presented on the fig. 6. In examples, the connection of the main input
W1 is shown. Other inputs are connected in the same way but we must
remember, that all inputs are galvanically separated between them and
have a system limiting the input current. The range of voltages control-
ling the input should be in the 5..24 V d.c. range.
DHB-102 / DHB-124
a)