CIRCUTOR DHB Series - Manual (Page 40)

40
Value
0 0.0000
1 00.000
4008 IndCp w/r 1...21
Number of points of the individual characteristic. For
the value 1, the individual characteristic is switched
off. Segments of the individual characteristic are
defined by parameters Xn and Yn, where n – point
number.
Minimal position of the decimal point when
displaying the measured value.
4009 d_P w/r 0...4
Selection of input quantity recalibration
4004 SCAL2 w/r 0, 1
Value
0 Multiplication by the constant
1 Division by the constant
Description
Permit for external functions
4005 E_In2 w/r 0, 1
Value Description
Mathematic function carried out on a measured value.
4006 w/r
Erase the auxiliary counter. The write of the value 1
into the register causes the erasing of the auxiliary
counter. The write of the value 2 causes the erasing
of the main counter . The write of the value 3 causes
the erasing of the main and auxiliary counters.
4007 w/r CLr
Description
FUnCt 0...5
Value Description
0 switched off
1 (
measured value
) 2
2
√
measured value
3 1/
measured value
4 (1/
measured value
) 2
5
√
1/ measured value
0 External functions does not influence
the auxiliary counter work.
1 External functions control the auxiliary
counter work.