Adept AnyFeeder - Manual (Page 14)

Chapter 1 - Overview
14 Adept AnyFeeder User’s Guide, Rev. B
1.7 Qualification of Personnel
This manual assumes that all personnel have attended an Adept training course and have
a working knowledge of the system. The user must provide the necessary additional
training for all personnel who will be working with the system.
As noted in this manual, certain procedures should be performed only by skilled or
instructed
persons. For a description of the level of qualification, Adept uses the standard
terms:
• Skilled persons have technical knowledge or sufficient experience to enable them
to avoid the dangers, electrical and/or mechanical.
• Instructed persons are adequately advised or supervised by skilled persons to
enable them to avoid the dangers, electrical and/or mechanical.
All personnel must observe sound safety practices during the installation, operation, and
testing of all electrically powered equipment. To avoid injury or damage to equipment,
always remove power by disconnecting the AC power from the source before attempting
any repair or upgrade activity. Use appropriate lockout procedures to reduce the risk of
power being restored by another person while you are working on the system.
WARNING:
Electrical Hazard!
Impact Hazard!
Never remove any safeguarding and never make changes
in the system that will decommission a safeguard.
WARNING: The user must get confirmation from every
entrusted person, before the person starts working with
the robot, that the person:
• Has received the manual
• Has read the manual
• Understands the manual
• Will work in the manner specified by the manual