Adept AnyFeeder - Manual (Page 47)

Commands and Parameters
Adept AnyFeeder User’s Guide, Rev. B 47
30 reset error
condition - - Must be
executed after
feeder reports an
error; feed plate
and bulk
container are
moved to the
home position.
31 restart feed
firmware - - Performs a ‘soft’
restart of feeder
firmware.
Commands to Set Parameters
17 set feed-forward
speed 1...10 feed-forward speed default = 1;
10 max.
18 set feed-backward
speed 1...10 feed-backward
speed default = 1;
10 max.
19 set
feed-/flip-forward
speed 1...10 feed-/flip-forward
intensity default = 1;
10 max.
20 set
feed-/flip-backward
intensity 1...10 feed-/flip-backward
intensity default = 1;
10 max.
21 set flip intensity 1...10 flip intensity default = 1;
10 max.
22 set dispense feed 1...10 dispense feed default = 1;
10 max.
23 set purge speed 1...10 purge speed default = 1;
10 max.
Table 4-2. Commands and Parameters
cmd
(Decimal
Value)
cmd Description
param
(Decimal
Value)
param Description Details