Adept AnyFeeder - Manual (Page 54)

Chapter 6 - Optional Equipment
54 Adept AnyFeeder User’s Guide, Rev. B
Figure 6-2. Backlight Power Plug Installed
4. Route the two small plugs of the backlight power cable through the front of the
feed platform and connect them to two connectors on the back of the backlight.
Figure 6-3. Connection to Backlight
5. Slide the backlight through the front of the feed platform.
6. Use a 3 mm Allen wrench to install four screws at the corners of the backlight to
secure it to the Adept AnyFeeder.
Figure 6-4. Securing Backlight to AnyFeeder
7. Reinsert the feed surface from the back of the Adept AnyFeeder and reinstall the
feed platform front cover using two screws.