Argox PA-20 Programming Guide - Manual (Page 84)

PT-20 Programming Guide 82
Description： The showet_image function displays a rectangular bitmap specified by pat
to the LCD d isplay. The rectangular’ s top left position and size are
specified by left, top, width, and height. The cursor position is not affected
after the operation.
left Display form the start point of X-axis.
top Display form the start point of Y-axis.
width Display the width form the start point.
height Display the high form the start point.
pat The buffer that you want to display data of image.
Returns： none
Notice： If you want to show a two bits file of BMP, you can change the format by
using SDKUtility, and write into the buffer. After that, it will show on PA-20
/PA-2010 / PA-21 / PA-2110 ’s LCD.