24 version, Commands execution – Artesyn ViewCheck on ATCA-9405 Installation and Use (November 2014) User Manual
Page 60
Advertising
Commands Execution
ViewCheck on ATCA-9405 Installation and Use (6806800S51F)
60
Example
BSF(diag-SP_VEE0)#switch-mode modeVal insm
Mode of ViewCheck is successfully changed to INSM
4.2.24 version
version
command displays the RPM versions of all the ViewCheck packages installed.
Syntax for CLI
version
Syntax for XML
<Script>
<InvokeMethod>
<Object>
<Class>diagnostic</Class>
<Name>SP_VEE0</Name>
</Object>
<Method>showVersion</Method>
</InvokeMethod>
</Script>]]>]]>
It is recommended to not to run following test cases in OOS mode:
OctBootTest
OctDDR2MemTest
OctRCStressTest
In order to execute these tests, you have to install ViewCheck OOS image on the blade.
Advertising
This manual is related to the following products: