8 show-rate, Table 4-22, Set-rate – Artesyn ViewCheck on ATCA-9405 Installation and Use (November 2014) User Manual
Page 74: Commands execution
Commands Execution
ViewCheck on ATCA-9405 Installation and Use (6806800S51F)
74
<Value>Rate</Value>
</Argument>
</InvokeMethod>
</Script>]]>]]>
The following table provides the set-rate command arguments.
4.4.8
show-rate
show-rate
command shows the rate of change value of network monitors.
Syntax for CLI
show-rate monitorId <Monitor Id> deviceInstance <Dev Instance>
Syntax for XML
<Script>
<InvokeMethod>
<Object>
<Class>deviceCategory</Class>
<Name>SP_VEE0-{Dev Cat}</Name>
</Object>
<Method>showRate</Method>
<Argument>
<Name>deviceInstance</Name>
<Value>Dev Instance</Value>
</Argument>
<Argument>
<Name>monitorId</Name>
Table 4-22 set-rate
Argument
Data Type
Description
Monitor ID
Integer
Type the unique ID of the monitor for which rate of
change value is to be set.
Dev Instance
Enum
Use list-device-instances command to get the
equivalent enumerated value of supported device
instance.
Rate
Integer
Rate of change value.