Avalon Firestyles 864 HO GS2 Installation - Manual (Page 36)

36 Installation
(for qualified installers only)
© Travis Industries 4140922 100-01410
Steps for Finalizing the Installation
1. Remove the glass frame (see page 38).
NOTE: If using propane (LP) convert the appliance prior to installing the logs.
2. We recommend you purge the gas line at this time (with the glass frame removed). This allows gas
to be detected once it enters the firebox, ensuring gas does not build up.
3. Make sure the two accent light bulbs are in place.
NOTE: Take care to not touch the bulb with your fingers (use a cloth or paper towel).
4. Install the required firebacks (see page 41).
5. Install the burner and media (logs or stones). See the instructions included with the burner and
media.
6. Replace the glass frame.
7. Install the four AA batteries (see illustration below). The AA batteries act as a power backup in case
the household (AC) power goes out and are required for operation. Install three AAA batteries into
the remote (see illustration below). Synchronize the transmitter to the IFC (see the owners manual).
AAA Battery
AAA Battery
°F
AAA Battery
AA Battery AA Battery
AA Battery AA Battery