Avalon Firestyles 864 HO GS2 Installation - Manual (Page 42)

42 Installation
(for qualified installers only)
© Travis Industries 4140922 100-01410
LP Conversion Instructions
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer’s
instructions and all applicable codes and requirements of the authority having jurisdiction. If the
information in these instructions is not followed exactly, a fire, explosion or production of carbon
monoxide may result causing property damage, personal injury or loss of life. The qualified service
agency is responsible for the proper installation of this kit. The installation is not proper and complete until
the operation of the converted appliance is checked as specified in the manufacturer’s instructions
supplied with the kit.
Install the LP conversion kit prior to installing the burner.
Remove the glass (see page 35).
The GSR Stepper Motor Kit (SKU 94400999) is required for converting this appliance to LP. The
kit contains the stepper motor (regulator) and torx wrench. The burner orifices and burner
gaskets are shipped with the appliance.
1. Access the firebox.
2. Remove and discard the manifold cover (see below).