Avalon Firestyles 864 HO GS2 Installation - Manual (Page 43)

Installation
(for qualified installers only)
43
© Travis Industries 4140922 100-01410
3. Follow the directions below to replace the orifices.
4. Install the new manifold cover included in the LP conversion kit (see illustration below).
Screw each LP orifice in so the
orifice protrudes 15/16" (24mm)
(indicating full insertion).
c
Look here for the orifice identification
Apply thread sealant to the LP
orifices prior to installation. Use
the chart below to identify the
correct orifices.
Front
Rear
NG
#48
#39
LP
1.25mm
.0625"
b
1/2" Wrench
Use a 1/2" open end wrench
to unscrew the two orifices.
Front Burner Orifice
a
Rear Burner Orifice
15/16"
24mm