Avalon Firestyles AGP - Manual (Page 39)

Maintenance
39
© Travis Industries 4141230 100-01270
Yearly Maintenance (or Every Ton of Pellets) - Clean the Convection Blower
1. Remove the thumb screw on the left side of the stove. Swing the panel out, slide it forward to
remove, and place it aside.
2. Remove the top and bottom screws securing the convection blower cover and remove the cover
as shown below (5/16” nutdriver).
3. Remove the 2 nuts securing the blower using a 7/16” nutdriver. Lift out and remove the
convection blower from the stove as shown below.
4. Remove all dust and debris from the convection blower.
NOTE: Take care to prevent damaging the impellers.