Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 18)

A d j u s t i n g t h e W i d e / N a r r o w K n o b s
You may need to adjust the two wide/narrow knobs according to
the width of your supply. For supply that is more than two inches,
adjust the knobs to the wide setting. For supply that is two inches
or less, adjust the knobs to the narrow setting.
You must adjust both of the knobs to
the same position.
If you experience ribbon smudging in cold, dry environments,
adjust the wide/narrow knobs to the wide setting.
For wide supplies, push down and turn the wide/narrow knobs
clockwise with a screwdriver. For narrow supplies, turn the
wide/narrow knobs counter-clockwise with a screwdriver until it
pops back up.
The adjustment is shown in the wide position.
2-6 Loading Supplies