Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 37)

12. Decide if you want to change the default (No) and press
either l or r to display your selection. If you select "Yes,"
the last tag in the batch is cut. The printer must feed one or
two tags past the printhead to cut the last tag in the batch.
Press
N.
Cut After Batch?
Prompt? Yes
13. Decide if you want to see this prompt in Batch Entry mode
and press either
l or r to display your selection. If you
select "Yes," the last tag in the batch is cut. The printer must
feed one or two tags past the printhead to cut the last tag in
the batch. Press
N.
Cut After Batch?
No r
14. Decide if you want to change the default (No) and press
either
l or r to display your selection. If you select "Yes,"
the knife cuts before the first tag and cuts after batch, so the
tags are cuts in strips. Press
N.
No Cut Before?
Prompt? Yes
15. Decide if you want to see this prompt in Batch Entry mode
and press either
l or r to display your selection. Press N.
No Cut Before?
No
r
16. Decide if you want to change the default (No) and press
either
l or r to display your selection. If you select "Yes,"
the knife does not cut before the first tag in a batch, but does
cut between each tag and after the last tag in a batch. Press
N.
Setting Batch Options
5-5