Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 53)

B a t c h S e p a r a t o r s
A batch separator is an extra tag printed in between batches with
a pinstripe pattern. If you select "Long" for the separator, a
double-length (two tags) separator prints. For non-indexed
supply, the batch separator is always six inches long. If you have
the Paxar
® 932
 stacker installed, the batch separator is 3.66
inches long. The name of the batch is shown on the batch
separator.
Changing this setting only affects new
formats sent to the printer.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press l or r until you see
SUPPLY
l Separators r
2. Press N to set the batch separators option. The current
setting is displayed, for example:
SEPARATORS
No
r
Batch Separator
Setting Supply Options
6-15