Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 73)

M o d e
To change the setting, from the Main Menu select Setup, Port
Settings, then Parallel Comm. Then, follow these steps.
1. Press l or r until you see
PARALLEL COMM
l
Mode
2. Press N.
MODE
Compatible
r
3. Use l or r to select either "Compatible" or "IEEE1284."
Press
N. Use compatible mode for a computer connection
to the printer with a parallel cable. Use IEEE-1284 for
bi-directional Ethernet communications. See Appendix B,
"Accessories and Options" for more information about
Ethernet options.
4. Press E until you see the Main Menu.
Communication Values
8-7