Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 85)

D e l e t i n g a S c r i p t
You can delete a script from the printer’s memory.
To delete a script:
1. From the Script Menu, press l or r until you see
SCRIPTS
l
Delete Script
r
2. Press N.
Are you sure?
l
Yes
3. Use l or r to select either "Yes" or "No" and press N.
Selecting "Yes" deletes the current script.
The flash memory used by the script is not
available for other scripts or fonts until the
flash memory is reformatted. However, when
you format flash memory, you must resend
the script and any downloaded fonts to the
printer.
4. Press E until you see the Main Menu.
E n a b l i n g S t a t u s P o l l i n g
Status polling allows you to obtain information about the
readiness of the printer and the current (or last received) print
job. Your System Administrator can enable status polling while
the printer is running in Script mode.
To enable status polling:
1. From the Script Menu, press l or r until you see
Using Scripts
10-5