Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 64)

To change the setting, from the Main Menu, select Setup, then
Defaults. Then, follow these steps.
1. Press l or r until you see
DEFAULTS
l
Slashed Zero
r
2. Press N. The current setting is displayed, for example:
SLASHED ZERO
No
r
3. Press l or r until you see the option you want. Then press
N. Press E until you see the Main menu.
P o w e r - U p M o d e
Power-up mode lets you decide how your printer starts each time
you turn it on. If you want the printer to be ready to start printing
when it is turned on, use the Online power-up mode. If you want
the operator to perform some other task first, use the Offline
power-up mode.
To change the setting, from the Main Menu, select Setup, then
Defaults. Then, follow these steps.
1. Press l or r until you see
DEFAULTS
l Powerup Mode r
2. Press N. The current setting is displayed, for example:
POWER UP MODE
Online
r
7-6 Setting Defaults