Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 45)

B a c k f e e d
This printer always uses extended backfeed operation whether
this option is selected or not. Backfeed works by advancing each
printed tag to the desired dispense position. Extended backfeed
feeds a tag far enough out to be cut and backfeeds the next tag
to the printhead line. Extended backfeed eliminates printed tags
being left between the printhead and knife. Extended backfeed
works with the selected cut modes. Refer to the optional Packet
Reference Manual to learn how to define the Backfeed Control
Packet.
Extended backfeed does not work with
non-indexed (continuous) supply. Do not use
backfeed with supplies less than 0.75 inches.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press l or r until you see
SUPPLY
l
Backfeed
r
2. Press N to set the backfeed option. The current setting is
displayed, for example:
BACKFEED
l
On
r
3. Press l or r to see the other options. After you display the
option you want, press
N. Press E until you see the Main
Menu.
Setting Supply Options
6-7