Baby Lock EmbroideryPro_BMP8_InstructionRef (BMP8) Instruction and Reference Guide - Manual (Page 201)

APPENDIX —————————————————————————————————————————————————————
184
7
Close the clamping frame so that the brim of
the cap passes between the inside clamping
frame and the outside clamping frame.
1 Brim
2 Inside clamping frame
3 Outside clamping frame
8
Neatly align the teeth of the clamping frame
with the base of the brim.
1 Teeth of clamping frame
2 Base of brim
Note
● Loosen the two screws for the outside
clamping frame, and then adjust the
position of the outside clamping frame so
that it conforms to the shape of the cap and
so that the teeth of the clamping frame
perfectly align with the base of the brim.
1 Teeth of clamping frame
2 Base of brim
3 Outside clamping frame
4 Screws for the outside clamping frame
9
Adjust the other side in the same way.
0
Close the lever of the snap lock.
1 Lever of the snap lock
2 3
1
1
2
1