Baby Lock EmbroideryPro_BMP8_InstructionRef (BMP8) Instruction and Reference Guide - Manual (Page 39)

EMBROIDERING TUTORIAL ——————————————————————————————————————————————
22
Screen overview
The basic operation flow is shown below.
In the pattern type selection screen, select
a pattern type. (Refer to page 23, 50)
1 Touch this key to continue to the pattern
editing screen. This key is not available
unless a pattern type is selected.
In the embroidering settings screen, if it is a
combined pattern , edit the entire pattern, specify the
embroidering settings and check the embroidery area.
(Refer to page 26, 54)
1 Touch this key to quit the current operation
and return to the pattern type selection
screen.
2 Touch this key to return to the pattern editing
screen.
3 Touch this key to continue to the embroidering
screen.
In the pattern editing screen, edit the
pattern. (Refer to page 25, 52)
1 Touch this key to return to the pattern type
selection screen and add another pattern.
2 Touch this key to continue to the
embroidering settings screen.
In the pattern list screen, select the
pattern. (Refer to page 23, 51)
1 Touch this key to return to the pattern type
selection screen.
2 Touch this key to continue to the pattern
editing screen.
In the embroidering screen, check the thread
colors assigned to the needle bars, and then install
the upper threads.Touch the unlock key so
that the start/stop button starts flashing in green and
the embroidery machine is ready to begin sewing.
After the embroidery is sewn, the embroidering
settings screen appears. (Refer to page 33, 56)
1 Touch this key to return to the embroidering
settings screen.