Baby Lock EmbroideryPro_BMP8_InstructionRef (BMP8) Instruction and Reference Guide - Manual (Page 78)

3 OTHER BASIC PROCEDURES
This chapter provides explanations on operations other than those described in
chapter 2, such as sewing a pattern with seven or more colors, changing the needles
and changing thread spools.
Resume the Operation Being Performed Before the Machine Was Turned OFF......62
Changing the Needle...............................................................................................63
Replacing the needle / 63
Correctly Using the Embroidery Frames..................................................................65
Embroidery frame types and applications / 65
Attaching Iron-On Stabilizer (Backing) to Fabric ....................................................66
Hooping the Fabric .................................................................................................67
Hooping the fabric in the extra-large and large embroidery frames / 67
Using the embroidery sheet / 68
Large/small pieces of fabric / 69
Embroidery Frame Position and Movement.............................................................70
Changing the Embroidering Position .......................................................................72
Adjusting the angle / 73
Embroidering a Pattern Containing Seven or More Colors ......................................75
Checking if thread spool changes are necessary / 75
Changing the Thread Spools with Designs of Seven or More Colors .......................77
Change thread spools message / 77 Easily changing the thread spools / 78
If the Thread Breaks or the Bobbin Thread Runs Out While Embroidering .............79
If the upper thread breaks / 79 If the bobbin thread breaks or runs out / 80
Embroidering From the Beginning or Middle of the Pattern ....................................81
Resume Embroidering After Turning OFF the Machine ...........................................83
Adjusting the Thread Tension..................................................................................85
Adjusting the tension of the bobbin thread / 85
Adjusting the tension of the upper thread / 86