Baby Lock EmbroideryPro_BMP8_InstructionRef (BMP8) Instruction and Reference Guide - Manual (Page 205)

APPENDIX —————————————————————————————————————————————————————
188
6
Align the holes on the embroidery frame holder
with the pins in the frame-mounting plate of the
carriage.
1 Pins in the frame-mounting plate
2 Holes on the embroidery frame holder
7
Secure the embroidery frame holder with the two
thumb screws.
1 Use the thumb screws included with the machine
(thumb screws removed in step 1 on page 173).
Additional digitizing
information
When creating a pattern for embroidering with a cap
frame, pay attention to following points in order to
avoid registration problems (misalignment of gaps in
the pattern).
1
Sew underlay stitches.
2
Start the embroidery pattern from the center,
and sew toward the ends.
With the machine, the order in which patterns
are selected when they are combined is the
order in which they will be sewn. For the
following example, select the patterns in the
order “E”
→
”A”
→
”B”
→
”R” to make the
combined pattern “BEAR”.
Note
● Do NOT sew from one end to the other,
otherwise wrinkling or shrinking may occur.
● Using the disc-shaped screwdriver
included, firmly tighten the thumb
screws.
CAUTION
Incorrect
sewing
order
Correct
sewing
order