Becker TRAFFIC ASSIST 7926 - Manual (Page 11)

11
THE TRAFFIC ASSIST >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
USB connection cable
The USB connection cable can be used to
connect the unit to a standard personal
computer by means of the USB port. You
can charge the Traffic Assist using the
USB cable. However, to use the data on
the PC, you will first have to install the
free "Active Sync" software from Micro-
soft
® .
Unit bracket
The Traffic Assist can be mounted in the
vehicle using the unit bracket.
Accessories
Mains power supply unit
This power supply allows connection of
the Traffic Assist to a mains outlet.
Requirements for power supply:
Alternating current
• 100-240 V
0.2 Amps
• 50-60 Hertz
External GPS antenna
You can use an external antenna to im-
prove reception in vehicles where only
limited GPS reception is available (not in-
cluded in the scope of supply). Please con-
tact your local stockist for more informa-
tion.
Headset
When using the Traffic Assist as an MP3
player, commercially available head-
phones with a 3.5 mm jack or adapter can
be connected (not included).
!Danger!
Prevention of damage to hearing
The use of headphones or ear-
phones over a relatively long
period of time at a high vol-
ume may cause permanent damage to
your hearing.
Conformity with the limits for sound
pressure laid down in the standard NF
EN 50332-1:2000 as required by
French Article L. 5232-1 is guaranteed.
Note:
Headphones must not be used while
driving. Comply with the local national
laws and regulations.