Becker TRAFFIC ASSIST 7926 - Manual (Page 46)

46
>>> NAVIGATIONAL MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
You will find information about working
with the entry menu in the "Entries made
with the entry menu" on page 26 chapter.
You will find information about scrolling
in lists in the "Scrolling through the lists"
on page 27 chapter.
Once you have selected a point of interest,
the keys in the lower area can be used:
• to display points of interest on the map
• define options of the drive profile
• to save the point of interest in the desti-
nations memory
• to start directions to the point of inter-
est immediately.
Navigation menu: Select on
map
If the destination required cannot yet
or can no longer be found in the destina-
tions memory, the
Select on map button
allows you to select it directly.
No address details are asked for in this
case.
> Press the Select on map key to make a
direct selection.
The map display appears.
> Gently press the screen surface until
a circle of dots is drawn around the des-
tination requested. The destination is
recorded.
Information on the point selected
is loaded from the set of data and dis-
played. There are buttons under the infor-
mation box which can be used to call up
several functions which are provided for
the route point selected.
Note:
The Category boxes do not have to
be completed. These are only used
to restrict the list of points of interest.
In large towns, this list may be very long.
Note:
You may have to use the zoom keys to in-
crease the area displayed to find the street
required.