Becker TRAFFIC ASSIST 7926 - Manual (Page 18)

18
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Battery quality declaration
The capacity of the rechargeable battery in
your mobile navigation system decreases
with every charging/discharging cycle.
Improper storage at excessively high or
low temperatures may also cause a gradual
deterioration of capacity. Consequently,
the operating time may be substantially
reduced even in the case of a fully charged
battery.
The rechargeable battery is designed such
that it should certainly still be possible for
it to be charged and discharged after 6
months of operation of your mobile navi-
gation system. In the event of a significant
loss of capacity, we recommend replace-
ment of the rechargeable battery. Please
contact your authorised dealer. Use only
genuine BECKER original spare parts.
Display quality declaration
In some cases, for technical reasons, a few
discoloured dots (pixels) may be visible on
the display. Some pixels may also appear
brighter or darker. However, such in-
stances do not represent a product flaw.
Start-up
Once the Traffic Assist has been unpacked
and checked for damage, the unit can be
started up. The individual start-up stages
are:
• insert memory card
• connect to power supply
• Switching on the unit
• Ensuring antenna reception (if naviga-
tion is desired)
Memory card
The memory card provided has a storage
capacity of 2 GB and offers sufficient
space for the complete European map set,
the Traffic Assist does not support larger
memory cards.
The complete European map set requires
approximately 1.8 GB of memory space.
If you intend to listen to music, look at
pictures or watch videos on the Traffic
Assist. We recommend that you store the
relevant data on a separate memory card
(not included in scope of delivery).
If you would like to listen to music with
the Traffic Assist during navigation, the
music must be stored on the supplied
memory card. The Traffic Assist does not
support the changing of memory cards
during navigation.
Note:
When the unit is switched on for the first
time, internal configuration takes place.
This takes several minutes. Do not switch
the unit off during this configuration.