BECKHOFF CX1100-000x - Manual (Page 7)

Foreword
Embedded PC 5
Documentation Issue Status
Version Changes
1.9 Notes on wire installation added
1.8 Notes on terminal bus diagnosis with firmware > B7 added
1.7 Terminal bus diagnosis in PLC program added
1.6 Notes on hardware revision added
1.5 Blink codes for IP-Link errors added
1.4 Display control via ADS commands added
1.3 Changes in GCB – Watchdog Error Counter
1.2 Blink codes for CX1100-0004 (EtherCAT) extended
1.1 library for 4 + 1 navigation switch added
1.0 memory mapping / fieldbus connections
0.2 revised version
description of four power supplies
CX10xx architecture description
0.1 preliminarily version