Bronkhorst E-8000 - Manual (Page 22)

Bronkhorst High-Tech B.V.
E-8000 9.17.076 22
In the edit mode, use and to change each character.
Press to select the next character.
Press to exit the edit mode without changes.
When the final character is changed, press to confirm and
to exit the edit mode.
3.2.10 PID controller settings
You can tune the controller settings by changing the PID
parameters. To edit these parameters use the
button to
select the 'pid controller' option and press again.
i
www
You can find more information about these
controller settings in the manual: 9.17.023 , This
manual is available at the download section of our
website: http://www.bronkhorst.com/files/
downloads/
manuals_english/917023_operation_instructions_
digital_instruments.pdf
In the pid-controller settings screen you can select one of the
PID parameters using
and . Press to enter the edit
mode.
Use the and buttons to edit each character, press
to select the next character. Press to cancel the input and
exit the edit mode without changes.
By pressing
after the final character you will confirm the
value. The new value will be sent to the instrument.