4 modules, 1 power supply, 1 model key power supply – Bronkhorst E-8000 User Manual
Page 35: 2 electrical connection, 3 bus powering, Modules, Power supply, Model key power supply, Electrical connection, Bus powering
Bronkhorst High-Tech B.V.
E-8000
35
9.17.076
4
Modules
4.1
Power supply
Each E-8000 power supply (PS) housing incorporates two power supply connectors. System setup is such that the instruments that
belong to the system can be powered. For other applications or modifications your supplier should be consulted. The power input
incorporates an on/off switch and a fuse.
4.1.1
Model key power supply
4.1.2
Electrical connection
Below you find an example of a blind power supply for two (PROFIBUS) Mass Flow Controllers.
The model key for this example is E-8501-0-0A.
4.1.3
Bus powering
Below you find an example of a blind power supply for two FLOW-BUS Mass Flow Controllers.
The model key for this example is E-8501-R-00
Note: The 19" housing can be equipped with a dual power supply. This means that the maximum power
Pmax=2x30Watt. Please check the total power consumption of your instruments. You can use the calculation table
in section 2.6