Bronkhorst E-8000 - Manual (Page 27)

Bronkhorst High-Tech B.V.
E-8000 27 9.17.076
3.2.17 Set alarm mode
When entering the alarm settings screen the alarm mode is
selected. Press
to enter the edit mode. Select an alarm
mode using and . Press to confirm your selection
and exit the edit mode.
Press to exit the edit mode without changes.
To change one of the alarm mode parameters use the and
buttons to select the parameter you want to change and
press to enter the edit mode.
Press to exit the edit mode without changes.
3.2.18 Set alarm mode parameters
In the edit mode, use and to change each character.
Press to select the next character.
When the final character is changed, press to confirm and
to exit the edit mode.
Press to exit the edit mode without changes.
3.2.19 Set setpoint at alarm
You can program an automatic setpoint which will be
activated when an alarm situation occurs.
To change this alarm setpoint use the button to select the
setpoint change option and press to enter the alarm
setpoint settings screen.