Cadac M16 - Manual (Page 11)

1-3
Revision MA2005-7 M16 Microphone Amplifier
1.4 Servicing
There are no serviceable parts contained within the M16. Refer all
servicing to your CADAC distrib-
utor.
1.5 Do not remove any covers
Within the M16 are areas where high and dangerous voltages are
present. Removing any covers will invalidate warranty.
1.6 Safety checklist
■ Install in accordance with CADAC’s instructions.
■ Do not place the apparatus on an unstable or uneven surface.
■ Do not insert objects through any apertures. Doing so could
result in damage to the unit or electric shock.
■ Do not use this apparatus near water.
■ Do not block any of the ventilation openings
■ Do not install near any heat sources.
■ Do not install near naked flames.
■ Protect the mains cable from being stressed or pinched.
■ For optimum results, do not use the M16 on the same electrical
circuit as industrial equipment, such as motors, stage machinery
or any other equipment that causes noise or switching transients
on the mains circuit.
■ Unplug this apparatus during lightning storms or when unused
for long periods of time.
■ Adjust only those controls that are covered by the operating
instructions.
■ Use only the mains cable provided with the M16. Other cables
may not have sufficient current rating.
■ Do not operate this unit with the cover removed.
■ Unplug the unit before cleaning.